Tile Restoration

This client contacted me because they were renovating their house in Lincoln and wanted to know it was possible to restore the Victorian tiled floor they found underneath the carpet. They had seen previous work of mine on-line and so confident I could help they decided to get in touch to see what could be done.

I went over to survey the floor and could immediately see it needed a lot of work. The floor was covered in all sorts of contamination, carpet adhesive, paint, plaster, cement, years of dirt and there were several areas of crumbled tiles that would need replacing.

I measured up and worked out a restoration plan along with the materials I would need to get the job done. Later that day I emailed over a quote to the owner, and they gave me go ahead to get the work done.

Deep Cleaning and Repairing a Victorian Tiled Hallway Floor in Lincoln

I started work by deep cleaning the floor tiles with Tile Doctor Remove and Go, this as its name suggests is a coatings remover that can deal with quite a lot of problems. A strong dilution was made and sprayed onto one section of floor at a time where it was left to soak in for roughly twenty minutes. The tiles were then scrubbed to soften the contaminates and I used a steamer and a scraper to get off as much of the glue as possible. Once done the soiling was rinsed off with water and extracted with a wet vacuum.

The initial treatment did well to remove the glue etc, but I could see more work was needed to really deep clean the years of dirt out of the Victorian tiles. For this I applied another Tile Doctor product called Nanotech HBU Remover, HBU stands for Heavy Build-Up. This was applied and extracted in the same way as before.

Next step was to carry out the repairs that were required which were mainly around the door thresholds. I’m not sure what it is with thresholds, but I guess this is generally where two floors meet, and the floor can experience some movement. To ensure a perfect match the owner had agreed for tiles to be removed from under the stairs so they could be re-used for the repairs. The space under the stairs was due to be boxed in as part of the renovations so you would never know.

With that done I moved onto the next step of giving the floor an acid rinse using Tile Doctor Acid Gel. This cleans up the tiles further by removing grout smears, dissolving efflorescent salts in the floor and the acidic nature of the product also neutralises the pH level of the floor after the use of strong alkaline cleaning products earlier. The floor was rinsed again afterwards, and then dried as much as possible with the wet vacuum before leaving it to dry off overnight.

Sealing a Victorian Tiled Hallway Floor in Lincoln

I left the floor to dry out for several days before returning to seal the tiles. Applying a sealer to damp tiles can result in a patchy appearance to on my return I checked the moisture levels first with a damp meter to ensure they were dry enough. The readings were fine, so I was able to apply a couple of coats of Tile Doctor Colour Grow which is a breathable colour enhancing sealer. This is a super durable product which will give great protection to the floor, especially when it is in a high traffic area such as a hallway.

Once the work was completed the floor looked so much better and I’m happy to report that both the husband and wife were amazed at the transformation. Before leaving I took time to discuss aftercare and recommended the use of Tile Doctor Neutral Tile Cleaner to maintain the floor. This is a pH neutral product which will is mild enough to use every day and won’t harm the sealer. It’s supplied as a concentrate so you only need a small amount of cleaning fluid to clean the floor and so a one litre bottle will last some time.

Professional Restoration of a Victorian Tiled Hallway in Lincolnshire